AO Tune Transducer

The AO Tune Negative Ion Transducers are the tuning forks of the AO Tune module. These transducers are designed and made to handle the frequencies produced in the module.

They have a permanent Si Bin power disk on the bottom to promote the si bin and negative ion benefits while using the scanner.

Si Bin and Black Tourmaline Benefits:

Increases stamina*
Enhances your body’s balance and centre*
Enhances metabolism*
Enhances your body’s immune system*
Stabilizes your body’s electrical balance*
Improves concentration and focus*
Aids fatigue recovery*
Aids elimination of bacteria*

Specifications

TWS (True Wireless Stereo) Supported
High Sensitive Speaker Built In
USB Type C Charging Port (not compatible with fast charger)
Bluetooth ver: 5.0. A2DP, HFP
Bone Conduction Transducer: 3 Watt
Frequency Range: 120Hz - 16kHz
Battery: 450 mAh Polymer Battery
Working Time: 5 hours with 75% volume
Charging Time: 40 Minutes Fully Charged
Product Size: 40mm x 40mm x 24mm
Product Weight: 37 grams

Charging and LED Indicator:

Use a USB cable compatible with common USB chargers, like a phone USB charger or a car charger. (Do not use a fast charger, the charging voltage cannot exceed five volts).

When charging, the red LED will be lit. Once charged, the red LED will switch off. When Bluetooth mode is turned on, the LED will blink blue. Once paired/connected, the blue light will be solid blue.

Usage Tips:

Use a nail or pin to assist the lanyard through the slot.

The speaker will get hot if the volume is turned up at maximum level. This is a normal condition. Lower the volume slightly, and the transducer's temperature will return to normal.

*These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.